Do it yourself
Frequently asked questions about cars and motorcycles

How to Repair and Reset the Flashing LPG Indicator on Hyundai I10

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Warning light – error code

In this video, we will see how to reset and repair the flashing LPG indicator and level on a first series Hyundai I10. First, open the boot and remove the floor panel to access the gas tank; then, remove the cover of the reducer by unscrewing the two fixing screws. At this point, unscrew the two screws of the manometer, disconnecting the electrical connector; then remove it and replace it with the new one. Now check the operation of the gas level; if the problem persists, it will be necessary to consult an authorised workshop for LPG systems!

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Hyundai I10 (2013-2020 / IA, MK 2) In today's video, see how to use the inflation and repair kit in the Hyundai I10. This device is provided with the vehicle instead of a spare wheel o…
Hyundai I10 (2013-2020 / IA, MK 2) In this video tutorial, you can see how to reset the maintenance light on the Hyundai i10. When the service light with the spanner illuminates, the f…

    Frequently Asked Questions

    • I10 2013-2020 - What do the orange warning lights on the Hyundai I10 mean? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos