Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Service Light on Hyundai Ix 35

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Service warning light

In this tutorial video, you will learn how to reset the service light for the routine oil change on a Hyundai Ix 35 in very simple steps. First, get inside the vehicle and turn on the ignition: then press the central button indicated to access the menu and hold down the button located just below, in order to reset the service light, as shown in the video. At this point, turn off the vehicle and turn it back on; if everything has been done correctly, the service light will have reset successfully!

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Hyundai IX35
How to Reset the Service Light on Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) Today, learn how to reset the service light independently on a Hyundai IX35 vehicle, produced from 2009 to 2015. Turn on the instrument panel and pre…
Reset Maintenance Light on Hyundai Ix35
Reset Maintenance Light on Hyundai Ix35
Hyundai ix35 (2009-2015 / MK 1) Let's see how to turn off the maintenance light on a Hyundai Ix35. Turn on the ignition with the button and check that the light is on. Press the but…
How to reset the tyre light on the Hyundai IX35
How to reset the tyre light on the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) Resetting the tyre light on your Hyundai IX35 is very simple, and the procedure to carry out the operation is truly within anyone's reach. Let's find…

    Frequently Asked Questions

    • Ix35 2009-2015 - How to reset the oil level warning light on Hyundai ix35? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos