Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from a Hyundai i30 MK1

Model: Hyundai I30 FD, MK 1 - Years 2007-2012
Part: Instrument cluster

Let's see in this video how to remove the instrument cluster from the first series Hyundai i30, following the instructions below. First, get inside the vehicle and start by removing the upper plastic cover of the instrument cluster by unscrewing the fixing screws; then unscrew the screws of the cluster found under the cover and disconnect all the electrical connectors located at the back. At this point, proceed, if necessary, with replacing the bulbs or the instrument cluster itself; apply the reverse procedure for reassembly!

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on a Hyundai i30 GD
How to Reset the Maintenance Light on a Hyundai i30 GD
Hyundai I30 (2016-2024 / PD, MK 3) This video shows the steps to reset the service light on a Hyundai i30. The operation is simple and quick. First, get inside the vehicle and turn on …
Resetting the Service Light on the Hyundai i30
Resetting the Service Light on the Hyundai i30
Hyundai I30 (2016-2024 / PD, MK 3) When it's time to change the engine oil in the Hyundai i30, a warning appears on the central display of the instrument cluster. After replacing the l…
How do you reset the Service light on a Hyundai i30?
How do you reset the Service light on a Hyundai i30?
Hyundai I30 (2016-2024 / PD, MK 3) It will be possible to completely turn off the Service light that appears on the instrument panel of the Hyundai I30 by turning on the ignition with …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos