Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Hyundai Kona

Model: Hyundai Kona MK 1 - Years 2017-2023
Part: Tire pressure warning light

In this video, you can see how to reset the tyre pressure light on a Hyundai Kona. First, ensure the vehicle is secure with the handbrake applied and the gear lever in neutral. Get into the vehicle and turn on the ignition; access the onboard computer and navigate until the tyre pressure monitoring display appears. If you see that one tyre is lower than the others, consult a tyre specialist immediately to check the cause. Once the tyre is repaired and inflated to the correct pressure, you can perform the reset by holding the appropriate button for a few seconds.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Hyundai Kona?
How to reset the tyre pressure warning light on the Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) To reset the tyre pressure warning light on the Hyundai Kona, do not press any buttons, and there is no procedure to reset the light from the onboard…
How to Reset the Tyre Pressure Warning Light on the Hyundai Kona
How to Reset the Tyre Pressure Warning Light on the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) In this guide, we will discover the steps to reset the tyre pressure warning light on the Hyundai Kona. Before recalibrating the TPMS sensors, ensure…
How to Replace the Tyre Pressure Sensor on a Hyundai Kona
How to Replace the Tyre Pressure Sensor on a Hyundai Kona
Hyundai Kona (2023-2026 / MK 2) Replacing the tyre pressure sensor on a Hyundai Kona is a simple and quick operation that you can do yourself. To carry out the replacement, you need…

How to Open the Bonnet of the Peugeot 206

Today's guide will show you the procedure necessary to open the bonnet of the Peugeot 206 in simple and quick steps. First, open the driver's front door and start pulling the small lever that releases the bonnet lock (located at the bottom); then move to the front of your car and lift the tab found in the centre of the bonnet (near the manufacturer's badge), as shown in the video. At this point, secure the prop rod on the bonnet to hold it up, ensuring it is perfectly inserted!

Watch the video!


by ScegliAuto

More videos