Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Navigation System on a Hyundai Elantra MK5

Model: Hyundai Elantra MK 5, MD, UD - Years: 2010, 2011, 2012, 2013, 2014, 2015
Part: Warning light – error code

See other generations:
Video tutorial

In this video tutorial, you will see how to reset the navigation system of the fifth generation Hyundai Elantra by following these simple and quick steps. First, get inside the vehicle and access the internal fuse box by removing the plastic cover; then press the off button followed by the on button found on the fuse box, as shown in the video.

At this point, turn on the vehicle's ignition and check the operation of your navigation system, following the video tutorial to the end!


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a Hyundai Elantra 6
How to Reset the Tyre Pressure Light on a Hyundai Elantra 6
Hyundai Elantra (2015-2020 / MK 6) If you want to manually reset the service light that keeps illuminating on the instrument cluster of your Hyundai Elantra Mk6 (2015-2020), simply fol…
Where is the Fuse Box on the Hyundai Elantra?
Where is the Fuse Box on the Hyundai Elantra?
Hyundai Elantra (2021-2026 / CN7, MK 7) The C7 Hyundai Elantra contains two fuse boxes. The first fuse box is located inside the cabin, specifically behind the driver's glove compartment. I…
How to reset the tyre pressure warning light on the Hyundai Elantra?
How to reset the tyre pressure warning light on the Hyundai Elantra?
Hyundai Elantra (2010-2015 / MK 5, MD, UD) To reset the tyre pressure warning light on the Hyundai Elantra, no specific procedure is required: it is sufficient for the sensors to read the corr…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos