Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Getz
    4. : How to remove the car stereo in a few simple steps.

Hyundai Getz - Video tutorial

Model: Hyundai Getz MK 1 - Years 2002-2011
Part: Car stereo
Operation: How to remove the car stereo in a few simple steps.

Removing the car radio is a very quick and easy operation that you can do in two minutes. To be able to detach it, you need two metal tubes closed as to form a V. Insert one on each side, in the 4 corresponding holes, two on each side, until you hear a click. Now levering your fingers on the plastic mask surrounding the car radio, gently pull it out by pulling it from the hooks you created with the metal tube. Unhook the power cord and the wires that connect it to the electrical system and you are done. The car featured in the video is a 2002 Hyundai Getz.


Posted on 24 July 2023 by ScegliAuto



How to remove stereo on Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) We replace the Hyundai Getz stereo if damaged, let's see how it is disassembled using the disassembly keys. Insert the keys into the holes on the pla
Disassembly of the original Hyundai Getz car radio
Hyundai Getz (2002-2011 / MK 1) Very simple operation in removing an original car radio on Hyundai Getz? Let's see carefully in this video how to perform the disassembly following t
How to remove the central dashboard of a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) How to disassemble the original car stereo of a Hyundai Getz? Let's see carefully in this video how to perform the disassembly. With a plastic lever

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos