Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I10
    4. : How to change the gearbox oil on Hyundai I10?

Hyundai I10 - Video tutorial

Model: Hyundai I10 MK 1, PA - Years 2007-2013
Part: Gear oil
Operation: How to change the gearbox oil on Hyundai I10?

To be able to change the gearbox oil of the Hyundai I10 you have to go to the lower part of the engine compartment, where you will have to remove the protection panel of the lower part of the gearbox. In this way, it will be possible to access the oil drain plug, which must be opened. All the oil that escapes can then be collected in a suitably positioned container. When it is completely leaking, it will be necessary to close the drain plug and install the protection panel, filling it from the hose located in the front part of the engine compartment.


Posted on 22 September 2022 by ScegliAuto



To reset the engine oil change reminder on the Hyundai I10.
Hyundai I10 (2013-2020 / MK 2, IA) Let's discover how to reset the maintenance light for the regular oil change of the Hyundai I10. First, we get inside the car and start the dashboard
Replacing the clutch on the Hyundai I10 1.1 Petrol
Hyundai I10 (2007-2013 / MK 1, PA) Let's find out in this video tutorial the steps to be able to change the clutch in a "do-it-yourself" way on the Hyundai I10 first series, with 1.1 p
How to replace the clutch cable of the Hyundai I10.
Hyundai I10 (2007-2013 / MK 1, PA) Below we will see the main steps that will allow us to disassemble and replace the clutch cable of the Hyundai I10, following these simple instructio

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos