Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Reina Verna
    4. : How to replace the front speaker on Hyundai Reina Verna

Hyundai Reina Verna - Video tutorial

Model: Hyundai Reina Verna MK 1 - Years 2017-2024
Part: Loudspeaker
Operation: How to replace the front speaker on Hyundai Reina Verna

If we intend to replace the front speakers on the car with more performing models, we must follow the instructions given in the video and in this description. First, obtain a plastic lever to release the small cover present immediately behind the door opening handle, under them there is a screw that must be disassembled and another screw is positioned immediately below the door at the bottom and also 'it must be disassembled. Then remove the plastic panel located behind the opening handle, also remove the panel located at the rear-view mirror, then again with the help of the plastic lever, start releasing all the fastening clips of the driver's door panel all around. The loudspeaker is located in the lower left part of the door panel. To disassemble it, unscrew the 3 connection screws and disconnect the power connector. Then take the new loudspeaker, place it in its seat and proceed to refit the screws and the connector. Then proceeds to reassemble all the components backwards to complete the job.


Posted on 10 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos