Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuse Box of the Hyundai i20

Model: Hyundai I20 MK 1, PB - Years 2008-2014
Part: Fuse box

If you have not yet found the fuses of your Hyundai i20 first series (2013), do not worry because in the following guide you will find all the instructions you need. First, completely switch off the car and disconnect the battery to eliminate any potentially dangerous current flow. Next, go inside the cabin and reach the driver's seat. Finally, locate the small compartment situated under the steering wheel and remove the cover. Once done, you will finally have access to the fuses.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the Fuse Diagram for the Hyundai I20 N?
What is the Fuse Diagram for the Hyundai I20 N?
Hyundai I20 (2020-2026 / BC3, MK 3) In this video, you can see where the fuse boxes are located in the Hyundai I20 N and their respective diagrams, useful if you need to check the fuses…
What is the Fuse Diagram for the Hyundai i20?
What is the Fuse Diagram for the Hyundai i20?
Hyundai I20 (2008-2014 / MK 1, PB) In this video, you can see where the fuse boxes are located in the Hyundai i20 and what their respective diagrams are, useful in case you need to che…
Where is the Fuse Box on the Hyundai i20?
Where is the Fuse Box on the Hyundai i20?
Hyundai I20 (2008-2014 / MK 1, PB) The Hyundai i20 contains two fuse boxes and a diagnostic port. The OBD port, diagnostic port, is located inside the cabin, specifically behind the dr…

Other guides you may be interested in

    Frequently Asked Questions

    • Hyundai I20 2014-2021 - Where is the radio fuse on Hyundai i20? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos