Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on the Hyundai I20?

Model: Hyundai I20 GB, IB, MK 2 - Years 2014-2021
Part: Tail light bulb

To replace the rear light bulb on the Hyundai I20, detach the plastic cover located next to the light unit, which is accessible only by opening the boot. Once this cover has been removed, you will be able to locate the screws underneath. These screws can be loosened so that the light can be extracted from its housing. Once the old light has been removed, you can pull out the bulb inside, disconnect it from the connector, and properly insert the new one.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Hyundai I20
How to replace the rear headlight bulb of the Hyundai I20
Hyundai I20 (2008-2014 / MK 1, PB) Replacing the rear headlight bulb on a Hyundai I20 car is a simple and quick operation to be carried out independently. To perform the replacement, w…
How to replace the rear brake light bulb of the Hyundai I20
How to replace the rear brake light bulb of the Hyundai I20
Hyundai I20 (2008-2014 / MK 1, PB) Today's video tutorial will show us how to disassemble and replace the rear headlight bulbs, specifically the brake light, of the Hyundai I20. First,…
How to Replace the Rear Headlamp Bulb on a Hyundai i20?
How to Replace the Rear Headlamp Bulb on a Hyundai i20?
Hyundai I20 (2014-2021 / GB, IB, MK 2) To replace the rear headlamp bulb on your Hyundai i20, open the boot to access the side screws securing the corresponding headlamp. Once these screws…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos