Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Remote Battery of a Hyundai

Model: Hyundai H1 MK 2, TQ - Years 2007-2023
Part: Key

Replacing the battery in the remote of a Hyundai H1 is a very simple operation that can be done in just a few steps. First, extract the metal part of the key by pulling it out with a bit of force; then, open the remote using the key itself or a flat-head screwdriver to pry it open. Once the remote is open, you can remove the battery and replace it with a new one; the model to insert is "CR2032". After completing all the steps shown in the video tutorial, close the remote and reinsert the metal key.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Hyundai H1 (2007-2023 / MK 2, TQ) In this guide, we will see the instructions that will allow you to change the rear differential oil on the Hyundai H1. First, perform the oil drain b…
Hyundai H1 (2007-2023 / MK 2, TQ) The Hyundai H1 could not be exempt from conversion into a camper, just like other vehicles with similar characteristics. The video guide presented he…
Hyundai H1 (2007-2023 / MK 2, TQ) The fuses in the Hyundai H-1 are contained within dedicated fuse boxes installed in the vehicle: this type of car has two fuse boxes. The first is lo…

Other guides you may be interested in

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos