|
Do it yourself
| |||
| ||||
How to change a tyre on a Hyundai?
Model: Hyundai I20
BC3, MK 3
- Years 2020-2026
In this video, we debunk the myth that a woman cannot change a tyre on her vehicle: driving on a flat tyre damages both the tyre and the wheel rim, and is also very unsafe. After all, changing a tyre is not difficult if you follow these simple steps: slow down gently and stop in a safe, flat location. Turn on the hazard lights and engage the handbrake. Get the spare wheel, and if you have them, a blanket, gloves, and wipes. Loosen the wheel nuts before lifting the car, then find the lifting points where the jack should be placed: these are indicated in the owner's manual. Do not use it on other points or you will damage the car! Lift the car just enough to allow the wheel to come off the ground; place the spare wheel under the car, then remove the nuts and position the spare wheel. Place the flat tyre underneath the vehicle. Securely fasten the wheel, remove the flat tyre from under the car, lower the vehicle, and tighten the nuts in a criss-cross pattern. Put everything back in the boot. Task complete.
Updated on 9 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Hyundai I20
(2008-2014 /
MK 1, PB)
In this video, we can see a condition that can occur on these vehicles, namely the loss of pressure in the absence of punctures, due to air escaping …
Hyundai I20
(2014-2021 /
GB, IB, MK 2)
It is advantageous to know that resetting the tyre pressure warning light on the Hyundai I20 mentioned does not require any procedure to follow. Let’…
Hyundai I20
(2008-2014 /
MK 1, PB)
Do you have a Hyundai car and need to change the flat battery? Or do you simply want to learn how to open your ignition key? It's straightforward! Pr…
Other guides you may be interested in
|
How to Repair the Key Spring of the Peugeot 207?
Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.058
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |