Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open a Stuck Boot on a Hyundai i30?

Model: Hyundai I30 GD, MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

On the Hyundai i30, the boot may get stuck, for example, due to a fault with the button or the lock actuator. In this case, perform the emergency opening by following the procedure shown in this tutorial.

First, open the right rear door, then locate the indicated lever, operate it, and fully lower the backrest. Next, go inside the boot area, insert the key into the slot in the centre, and unlock the lock.

At this point, you can open the boot and replace the faulty component.


Updated on 13 September 2026 by ScegliAuto


Related tutorials

How to open a stuck tailgate on the Hyundai i30?
How to open a stuck tailgate on the Hyundai i30?
Hyundai I30 (2007-2012 / MK 1, FD) On the Hyundai i30, the tailgate may become stuck, for example, due to a problem with the control button or the lock actuator. In these cases, you ca…
How to Remove the Front Door Panel on the Hyundai i30?
How to Remove the Front Door Panel on the Hyundai i30?
Hyundai I30 (2007-2012 / MK 1, FD) In this tutorial, see how to remove the front door panel on the Hyundai i30, a very simple and quick operation. First, open the door in question, the…
How to Replace the LED Rear Lights on the Hyundai i30
How to Replace the LED Rear Lights on the Hyundai i30
Hyundai I30 (2016-2024 / MK 3, PD) In this video tutorial, you will learn how to remove and replace the LED rear bulbs on the Hyundai i30 in simple and quick steps. First, open the boo…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos