Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open a stuck tailgate on the Hyundai i30?

Model: Hyundai I30 MK 1, FD - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

On the Hyundai i30, the tailgate may become stuck, for example, due to a problem with the control button or the lock actuator. In these cases, you can still perform an emergency opening by following the simple procedure shown in this tutorial.

First, open the rear doors, then lower the rear seatback by operating the relevant lever. Next, position yourself inside the boot, remove the indicated small panel, and manually operate the lock.

The tailgate will then be free to open.


Updated on 23 September 2026 by ScegliAuto


Related tutorials

How to Open a Stuck Boot on a Hyundai i30?
How to Open a Stuck Boot on a Hyundai i30?
Hyundai I30 (2011-2016 / GD, MK 2) On the Hyundai i30, the boot may get stuck, for example, due to a fault with the button or the lock actuator. In this case, perform the emergency ope…
How to Open the Fuel Filler Flap in the Hyundai i30?
How to Open the Fuel Filler Flap in the Hyundai i30?
Hyundai I30 (2007-2012 / MK 1, FD) In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of m…
How to Replace the LED Rear Lights on the Hyundai i30
How to Replace the LED Rear Lights on the Hyundai i30
Hyundai I30 (2016-2024 / MK 3, PD) In this video tutorial, you will learn how to remove and replace the LED rear bulbs on the Hyundai i30 in simple and quick steps. First, open the boo…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos