Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery on the Hyundai Kona?

Model: Hyundai Kona MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
This video is currently unavailable

In this tutorial, you will learn how to replace the key fob battery on the Hyundai Kona, a very simple and quick operation. You will need a replacement CR2032 battery and a small flathead screwdriver.

First, extract the emergency metal key by pressing the designated button, then insert the screwdriver into the newly exposed slot, lever it open, and unlock the rear cover. At this point, remove the old battery, insert the replacement ensuring the correct polarity, and reassemble everything.


Updated on 7 October 2026 by ScegliAuto


Related tutorials

Replacing the Key Fob Battery on a Hyundai Kona
Replacing the Key Fob Battery on a Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) These brief steps will guide you on how to disassemble and replace the battery in the key fob for a Hyundai Kona. First, take the key fob in hand and…
How to Change the Key Fob Battery for the Hyundai Kona
How to Change the Key Fob Battery for the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Follow these step-by-step instructions to disassemble and replace the battery in the key fob for the Hyundai Kona. First, take your key fob and remov…
Guide to Replacing the Key Fob Battery for the Hyundai Kona
Guide to Replacing the Key Fob Battery for the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Let’s look at the steps to disassemble and replace the battery in the key fob for the Hyundai Kona. First, take the key fob in hand and remove the ph…

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos