Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on Infiniti M 37

Model: Infiniti M Y51 - Years 2010-2019
Part: Cabin air filter

In this video tutorial, you can see how to replace the cabin filter on the Infiniti M 37 by following a few simple steps: the first thing to do is purchase a new pollen filter; next, get into the vehicle, turn off the engine, and pull the handbrake. The cabin filter on this vehicle can be found behind the glove compartment, so open the drawer and pull it upwards, then wiggle it to detach it from the hinges; now disconnect the pin located at the bottom and you're done; once the drawer is removed, take out the panel inside, but before doing this, remove the side panel by applying a gentle pressure. Now unscrew the screws securing the panel inside. Once the panel is removed, disconnect the attached cables; you will now be facing the filter box, so remove the filter cover and take out the old filter element. Place the new filter.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Cabin Fuse Box of the Infiniti M35
Where to Find the Cabin Fuse Box of the Infiniti M35
Infiniti M (2005-2010 / Y50) In this quick guide for Infiniti M35 owners, you will find how to locate the cabin fuse box in seconds. First, open the driver's side door, then turn…
How to disassemble the door panel of the Infiniti M
How to disassemble the door panel of the Infiniti M
Infiniti M (2010-2019 / Y51) Today's guide will show us the process of disassembling the front door panel of the Infiniti M. First, we open the front door of the vehicle and begi…
How to Repair the Front Headlight
How to Repair the Front Headlight
Infiniti M (2005-2010 / Y50) Over time, the headlight can deteriorate due to vibrations or impacts. To access the headlight housing, you need to remove some components from the e…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos