Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Steering Wheel on the Infiniti Q40 - G37 - G35

Model: Infiniti Q40 V36 - Years 2014-2015
Part: Steering wheel

In this guide, we will see the instructions on how to remove and replace the steering wheel on the Infiniti Q40, as well as the G37 and G35. First, get inside the vehicle and start pressing on the rear holes to remove the steering wheel airbag, disconnecting the electrical connector found on the back; then use a socket wrench with an extension to remove the center nut of the steering wheel, in order to take it off, as shown in the video. At this point, install the new steering wheel, positioning it perfectly straight; finally, install the airbag!

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box in the Infiniti Q40
Where to Find the Fuse Box in the Infiniti Q40
Infiniti Q40 (2014-2015 / V36) The fuse box in the Infiniti Q40 is well hidden and protected, making it not always easy to locate. Fortunately, this guide provides all the informat…
How to Reset the Oil Service in the Infiniti Q40?
How to Reset the Oil Service in the Infiniti Q40?
Infiniti Q40 (2014-2015 / V36) In this tutorial, you will see how to reset the oil service in the Infiniti Q40. Before performing this simple and quick operation, ensure that you h…
Replace the Front Brake Pads on an Infiniti Q40
Replace the Front Brake Pads on an Infiniti Q40
Infiniti Q40 (2014-2015 / V36) Today, in this video tutorial, see how to remove and replace the front brake pads on an Infiniti Q40, following the instructions below. First, lift t…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos