Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of the Infiniti Q40?

Model: Infiniti Q40 V36 - Years 2014-2015
Part: Engine oil

To change the engine oil of the Infiniti Q40, access the underside of the vehicle near the engine compartment: here you will find a plastic panel that needs to be removed to access the drain plug of the oil pan. Once this is unscrewed, allow all the used oil to flow into a properly positioned container, and you can also remove the oil filter located in the same area. After all the oil has drained and the filter has been replaced, open the hood to refill.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box in the Infiniti Q40
Where to Find the Fuse Box in the Infiniti Q40
Infiniti Q40 (2014-2015 / V36) The fuse box in the Infiniti Q40 is well hidden and protected, making it not always easy to locate. Fortunately, this guide provides all the informat…
How to Replace the Door Light Bulb in an Infiniti Q40?
How to Replace the Door Light Bulb in an Infiniti Q40?
Infiniti Q40 (2014-2015 / V36) To replace the door light bulb in an Infiniti Q40, pry inside the housing of the dome light at the lower inner part of the door. Once the dome light …
How to Reset the Oil Service in the Infiniti Q40?
How to Reset the Oil Service in the Infiniti Q40?
Infiniti Q40 (2014-2015 / V36) In this tutorial, you will see how to reset the oil service in the Infiniti Q40. Before performing this simple and quick operation, ensure that you h…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos