Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

IVECO Daily - Engine

Engine IVECO Daily (1999-2006 / mk 3)

IVECO Daily (1999-2006 / MK 3)
How do you clean the engine in an Iveco Daily 35 10 2.8 turbo?
Cleaning the engine of an Iveco Daily 35 10 2.8 turbo requires a certain amount of attention and patience. First of all, turn off the engine and let it cool …Read all…
Posted on 1 October 2025 by ScegliAuto
IVECO Daily (1999-2006 / MK 3)
Iveco Daily Engine Starting Issues
In this video, we examine an Iveco Daily MK3 that sometimes has serious starting difficulties. No errors were found from the diagnostic ports, making it quite …Read all…
Posted on 13 November 2026 by ScegliAuto
Cigarette lighter (1) Airbag (1) Air conditioning (1) Car stereo (20) Battery (3) Transmission (2) Body (4) Key (2) Timing belt (29) V-belt (1) Onboard computer (11) Checks and maintenance (28) Throttle body (1) Dashboard (8) Bearing (2) Differential (1) Brake rotors (1) Side marker light (1) Headlight (2) Tail light (1) Fog lights (1) Diesel particulate filter (1) Air filter (1) Cabin air filter (11) Fuel filter (1) Diesel fuel filter (3) Parking brake (3) Clutch (1) Light bulb (1) Side marker bulb (2) Headlight bulb (4) Antifreeze coolant (1) Instrument panel light (1) License plate light (1) Engine (2) Starter motor (2) Engine oil (1) Clock (35) Brake pads (3) Shift knob (2) Pump (1) Fuel pump (2) Instrument cluster (5) Radiator (1) Heater core (2) Wheel (2) Fuse box (76) Seat (3) Crankshaft position sensor (1) Side mirror (11) AdBlue warning light (1) Warning light – error code (23) Tire pressure warning light (1) Service warning light (75) EGR valve (2) Blower motor (2)

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos