Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front turn signals in the Iveco Daily camper?

Model: IVECO Daily MK 3 - Years 1999-2006
Part: Side marker light

In this tutorial we can see how to replace the front turn signals in the Iveco Daily camper, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the hood, locate the metal clip on the back of the taillight and, pulling it towards us, release the bulb. Then remove the bulb from the housing, unscrew the single fixing bolt with a long 10mm socket wrench and separate the taillight from the body. At this point, all that remains is to position the replacement and reassemble everything following the reverse procedure.

Posted on 11 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Install a Recycled Swivel Seat on an Iveco Daily Camper
How to Install a Recycled Swivel Seat on an Iveco Daily Camper
IVECO Daily (2006-2020 / MK 4) This video shows how to take a standard seat from a Ford Galaxy and, with a small modification, transform it into a swivel seat for our Iveco Daily c…
How to replace the timing belt of the Iveco Daily 2.3
How to replace the timing belt of the Iveco Daily 2.3
IVECO Daily (2006-2020 / MK 4) Today's guide will show us the necessary steps to disassemble and replace the timing belt of the Iveco Daily 2.3. First, we open the hood and remove …
How to Replace the Indicator Bulb on the Iveco Daily Mk5
How to Replace the Indicator Bulb on the Iveco Daily Mk5
IVECO Daily (2014-2026 / MK 5) This guide shows how to replace the direction indicators located on the wing mirrors of the Iveco Daily Mk5. The first step is to remove the two wing…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos