Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the Diagnostic Port and Fuses in the Iveco Daily MK4

Model: IVECO Daily MK 4 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuse box

See other generations:
Video tutorial

In this video, see the location of the EOBD (European On Board Diagnostic) port used to read all errors accumulated in the ECU and perform accurate diagnostics of engine faults. It is located inside a panel situated on the lower left side of the dashboard relative to the steering wheel: remove four securing screws, and inside you will find not only the diagnostic socket but also the fuses for the passenger compartment.

Other fuses are located in the engine compartment, on the right side of the starter battery, and some are situated directly above the battery at the positive terminal.


Updated on 11 November 2026 by ScegliAuto


Related tutorials

Where is the OBD2 Port on the Iveco Daily 4?
Where is the OBD2 Port on the Iveco Daily 4?
IVECO Daily (2006-2020 / MK 4) In this mini guide for those of you with an Iveco Daily Mk4, we will discover where the OBD2 port is located, allowing you to connect an electronic d…
Where is the OBD2 port on the Iveco Daily 2009?
Where is the OBD2 port on the Iveco Daily 2009?
IVECO Daily (2006-2020 / MK 4) If you want to access the OBD2 port located inside your Iveco Daily (2009 model), simply follow the steps described below. First, enter the vehicle a…
Where is the OBD port of the Iveco Daily?
Where is the OBD port of the Iveco Daily?
IVECO Daily (2006-2020 / MK 4) The OBD port, or on-board diagnostic socket of a vehicle, has been mandatory for many years and serves to connect the car to the diagnostic computer.…

Other guides you may be interested in

How to Replace the Front Headlamp on the Renault Kadjar?

The front headlamp of the Renault Kadjar, as seen in the video, can be easily replaced, but first, you need to remove the bumper and the wheel arch liner. The headlamp securing pins are mounted at the top and also used at the bottom and rear of the headlamp, which can only be accessed after removing the aforementioned bumper and wheel arch liner. At this point, simply pull the headlight assembly outwards, removing it from its housing, and disconnect the electrical connectors for the bulbs.

Watch the video!


by ScegliAuto

More videos