Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. IVECO
  4. :
  5. Daily
  6. : Where is the OBD2 port located on the Iveco Daily 4?

IVECO Daily - Video tutorial

Model: IVECO Daily MK 4 - Years 2006-2020
Part: Dashboard
Operation: Where is the OBD2 port located on the Iveco Daily 4?

In the following mini guide dedicated to all of you who own an Iveco Daily Mk4, we will discover where the OBD2 port is located, through which you can connect an electronic diagnostic tool to identify and resolve any errors in the engine control unit. First of all, make sure that your Iveco Daily is safely parked, then open the driver's side door and enter the cabin. At this point, locate the small compartment on the left side of the dashboard and find the fuses inside. Before working on the fuses, remember to disconnect the vehicle's battery.


Posted on 25 December 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos