Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 Port on the Iveco Daily?

Model: IVECO Daily MK 4 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

See other generations:
Video tutorial

The OBD2 port on an Iveco Daily vehicle is located inside the vehicle's cabin. The position of the OBD2 port is somewhat inconvenient compared to other vehicles, as it is situated under the dashboard on the driver's side near the pedal area.

It is identified by its yellow colour. The port is regularly used during the reset of various warning lights, such as those related to tyre pressure or service intervals, and is also essential for diagnosing errors from the ECU or other electrical components not visible to the naked eye. The installation of the port became mandatory from the year 2000.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

Where is the OBD2 port on the Iveco Daily 2009?
Where is the OBD2 port on the Iveco Daily 2009?
IVECO Daily (2006-2020 / MK 4) If you want to access the OBD2 port located inside your Iveco Daily (2009 model), simply follow the steps described below. First, enter the vehicle a…
Where to Find the OBD2 Port in the Iveco Daily 2001
Where to Find the OBD2 Port in the Iveco Daily 2001
IVECO Daily If you want to connect a professional diagnostic tool to your 2021 Iveco Daily but don't know where the OBD2 port is located, carefully read the foll…
Where is the OBD2 port of the Iveco Daily 2006 located?
Where is the OBD2 port of the Iveco Daily 2006 located?
IVECO Daily (2006-2020 / MK 4) If you do not know where the OBD2 port is located inside your Iveco Daily (2006), do not worry because you will find all the information you need in …

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos