Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Iveco Daily II?

Model: IVECO Daily MK 2 - Years: 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Fuse box

See other generations:
Video tutorial

The Iveco Daily, produced from 1989 to 2000, has two fuse boxes inside. The first fuse box is located inside the front hood, specifically installed between the battery and the engine of the vehicle.

Inside the box, there are medium and high amperage fuses, also called relays. These fuses are responsible for controlling the operation of the electronic parts of the front hood, such as the starter motor fuse.

The second fuse box is located inside the cabin, behind the driver's glove compartment. Inside, there are small and medium amperage fuses.

These fuses are responsible for controlling the operation of the electronic parts of the cabin, such as the radio fuse.


Posted on 21 September 2025 by ScegliAuto


Related tutorials

Where Are the Fuses for the Iveco Daily Located?
Where Are the Fuses for the Iveco Daily Located?
IVECO Daily The fuses for the Iveco Daily are contained within the dedicated fuse box installed in the vehicle. This is located inside the cabin, below the steer…
Where are the fuses located in the Iveco Daily?
IVECO Daily The fuses in the Iveco Daily are located inside the dedicated fuse boxes installed on the vehicle: the first is found inside the dashboard, beneath t…
Where to Find the Fuse Box on the 2009 Iveco Daily
IVECO Daily If you own a 2009 Iveco Daily and want to find the box containing all the various fuses, simply follow the steps described in this guide. First, turn…

Other guides you may be interested in

How to Replace the Front Headlamp on the Renault Kadjar?

The front headlamp of the Renault Kadjar, as seen in the video, can be easily replaced, but first, you need to remove the bumper and the wheel arch liner. The headlamp securing pins are mounted at the top and also used at the bottom and rear of the headlamp, which can only be accessed after removing the aforementioned bumper and wheel arch liner. At this point, simply pull the headlight assembly outwards, removing it from its housing, and disconnect the electrical connectors for the bulbs.

Watch the video!


by ScegliAuto

More videos