Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port located on the Iveco Daily 2020?

Model: IVECO Daily MK 5 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Checks and maintenance

See other generations:
Video tutorial

To locate the OBD port inside your 2020 Iveco Daily vehicle, simply follow the steps described in the following guide. First, make sure the vehicle is safely parked on a flat surface, then shift your attention to the lower area of the dashboard, near the steering wheel.

Next, locate the OBD port on the left side and you have successfully completed the procedure. If needed, you can connect a diagnostic tool to the OBD port.


Posted on 12 October 2025 by ScegliAuto


Related tutorials

Where is the OBD port on the Iveco Daily?
Where is the OBD port on the Iveco Daily?
IVECO Daily (2014-2026 / MK 5) The OBD port of the 2014 Iveco Daily van is located behind the protective panel at the bottom of the passenger side dashboard. This connection port a…
Where is the OBD port of the Iveco Daily?
Where is the OBD port of the Iveco Daily?
IVECO Daily (2006-2020 / MK 4) The OBD port, or on-board diagnostic socket of a vehicle, has been mandatory for many years and serves to connect the car to the diagnostic computer.…
Where is the OBD port located on the Iveco Daily 2012?
Where is the OBD port located on the Iveco Daily 2012?
IVECO Daily (2006-2020 / MK 4) If you are looking for the OBD port located inside the cabin of your Iveco Daily fourth series (2012), then all you have to do is follow the few simp…

Other guides you may be interested in

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos