Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Steering Tie Rod End of an Iveco Daily

Model: IVECO Daily MK 4 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

The steering tie rod end of the Iveco Daily can wear out, creating dangerous play. To check it without removing the wheel, lift the vehicle, grasp the wheel horizontally, and move it: if you hear a "click" or a movement of half an inch, the tie rod end needs replacing.

To replace it, loosen the locknut with a 24 mm spanner. Unscrew the top nut (22 mm) almost completely.

Use a hammer to tap on the nut and free the tie rod end. If it is stuck, heat the housing with a flame to facilitate removal. Clean the housing and mark the number of turns to unscrew the old tie rod end. Fit the new tie rod end (you can find it on eBay with code 123957470093 for £16.50, with free delivery) screwing it in the same number of turns, tighten the top nut with a torque wrench to about 70 Nm (the correct torque is 60-83 Nm) and tighten the locknut.

Refit the wheel. After replacement, it is advisable to have a wheel alignment to ensure the steering is straight.


Posted on 16 August 2026 by ScegliAuto


Related tutorials

Where Are the Fuses for the Iveco Daily Located?
Where Are the Fuses for the Iveco Daily Located?
IVECO Daily The fuses for the Iveco Daily are contained within the dedicated fuse box installed in the vehicle. This is located inside the cabin, below the steer…
Where are the fuses of the Iveco Daily located?
Where are the fuses of the Iveco Daily located?
IVECO Daily (1999-2006 / MK 3) All the fuse boxes of the Iveco Daily have the function of containing the fuses that regulate the operation of the devices installed on the vehicle. …
Where are the fuses of the Iveco Daily located?
Where are the fuses of the Iveco Daily located?
IVECO Daily (1999-2006 / MK 3) Each of the fuses of the Iveco Daily is contained within the appropriate fuse box that is installed on the vehicle: in this category of vehicle, the …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Adjust the Rear Seats of the BMW X1

In this video, see how the BMW X1's cargo area can be used to transport large loads. To expand this area, the rear seat can be folded down with a 40/20/40 split, each section can be folded separately or all together. The seats can be adjusted independently to provide more space for passengers or cargo: to do this, pull the handle located at the bottom and push or pull as needed. To position the backrest in the desired position, there is a cordura handle on the left side. Inside the trunk, there are buttons that automatically fold the backrests of the rear seats forward, but only after ensuring they are clear. They can be returned to an upright position manually using the cordura handle.

Watch the video!


by ScegliAuto

More videos