Do it yourself
Frequently asked questions about cars and motorcycles

Where are the fuses of the Iveco Eurocargo located?

Model: IVECO Eurocargo MK 1 - Years 2002-2008
Part: Fuse box

The fuses of the Iveco Eurocargo are located inside the special fuse box. This is located inside the passenger compartment, immediately below the steering column. To access it, it is necessary to remove the plastic cover of the lower part of the column, immediately above the pedals. The box is connected to numerous cables and is fitted inside its housing on the left. In order to replace a blown fuse, it must be identified and extracted with the appropriate pliers. After removing the old fuse, it will be possible to replace it with a new spare part and check the correct functioning of the relevant device.

Posted on 3 November 2021 by ScegliAuto

Video tutorial

Related tutorials

IVECO Eurocargo In order to set the Iveco Eurocargo clock, you need to turn on the instrument panel, so that you can then move around the menu with the steering whee…
IVECO Eurocargo (2002-2008 / MK 1) The display located at the centre of the Iveco Eurocargo's instrument panel represents the IBC system: Iveco Body Computer. This device allows you to…
IVECO Eurocargo (2002-2008 / MK 1) How to replace fuses on Iveco? We open the door and see the disassembly of the pieces. We open the glovebox, unscrew the fastening screws and remove …

Other guides you may be interested in

    Frequently Asked Questions

    • Eurocargo - What is the cigarette lighter fuse of the Iveco Eurocargo Mk2? Read answer

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos