Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the dipped beam of the Stralis

Model: IVECO Stralis
Part: Headlight bulb

If the dipped beam headlight bulb has a malfunction or is completely faulty then you must necessarily proceed with its replacement. Fortunately, this can be easily done by anyone on their own and takes a couple of minutes to complete. First make sure you have turned off the vehicle, then go in front of the headlight containing the bulb to be changed and remove the small plastic cover on the side. Then move to the door and unscrew the two screws present with a Phillips screwdriver. At this go back to the bumper and pull the headlight towards you. Remove the rubber cap and unscrew the bulb. Replace it with a new one and reposition the headlight correctly. Finally, retighten the two screws removed earlier.

Posted on 23 January 2022 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the front headlight bulbs in the Iveco Stralis truck?
How to replace the front headlight bulbs in the Iveco Stralis truck?
IVECO Stralis As we can see in this tutorial, replacing the front headlight bulbs in the Iveco Stralis truck is an extremely simple and fast operation. First of al…
Positioning of the internal fuse box of the Iveco Stralis.
Positioning of the internal fuse box of the Iveco Stralis.
IVECO Stralis Below we will see the steps that will allow us to locate the internal fuse box of the Iveco Stralis, following the instructions below. First of all, …
Location of the internal fuse box on the Iveco Stralis 450
Location of the internal fuse box on the Iveco Stralis 450
IVECO Stralis In today's video we will see the positioning of the Iveco Stralis 450 internal fuse box. First of all, we get on board the passenger compartment and …

Other guides you may be interested in

Reset Tyre Pressure Light Toyota Yaris 2016

Due to advancements in onboard electronics, many vehicles are equipped with various sensors that monitor several operating parameters, including tyre pressure. Even if the pressure is correct, the warning light may sometimes illuminate on the dashboard. First, check with a gauge that the pressure in all 4 tyres matches the manufacturer's specifications. For the 2016 Toyota Yaris, the values are as follows: Front: 2.2 bar for T-type tyres, 2.3 for H-type, 2.4 for W-type. Rear: 2.2 bar for all tyre types. To reset the pressure light, turn on the ignition with the key, locate the reset button under the steering column. Press it for 3 seconds, and the light will flash 3 times before turning off. Remove the key from the ignition and start the vehicle.

Watch the video!


by ScegliAuto

More videos