How to Reset the Maintenance Service on a 2015 Iveco Daily

Model: IVECO Daily MK 5 - Years 2014-2026
Part: Warning light – error code

As shown in the video, to reset the maintenance service after changing the engine oil or for other reasons on a 2015 Iveco Daily, switch off the engine and put the gear in neutral. Press the accelerator pedal fully down until the procedure is complete. Turn the ignition on by moving the key to position one and wait for about 20-30 seconds. You will see the menu with various sections moving on the display. At this point, press the brake pedal six times. Then switch off the ignition. Remove your foot from the accelerator pedal and wait about ten seconds before turning the ignition back on. The reset has been completed.

Updated on 30 July 2026 by ScegliAuto

This video is currently unavailable

Other guides you may be interested in

Key - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Engine - Maintenance and repair on other vehicles

Engine Oil - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!

by ScegliAuto

How to Reset the Maintenance Service on a 2015 Iveco Daily

Related tutorials

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

More videos