Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. IVECO
    3. :
  3. Daily
    4. : To reset the service light on the Iveco Daily.

IVECO Daily - Video tutorial

Model: IVECO Daily MK 5 - Years 2014-2023
Part: Instrument cluster
Operation: To reset the service light on the Iveco Daily.

To reset the service light on the Iveco Daily, you can follow these steps: Turn on the Iveco Daily and make sure the service light is displayed on the dashboard. Press and hold the reset button on the dashboard control panel. Usually, this button is located on the lower right side of the dashboard, near the service light. While holding the reset button, turn on the ignition of the Iveco Daily without starting the engine. Continue to hold the reset button. After a few seconds, the service light will start flashing or changing color. Release the reset button and wait a few seconds. Press the reset button again for about 3-5 seconds and then release it. The service light should turn off or return to its normal state.


Posted on 14 July 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos