Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Iveco Daily?

Model: IVECO Daily
Part: Service warning light

Today, let's learn how to reset the oil change service light on an Iveco Daily by following the instructions below. First, get inside the vehicle and connect your diagnostic tool to the OBD socket located below on the driver’s side; then turn on the instrument panel to allow the software to communicate with the ECU, as shown in the video. At this point, follow the instructions provided to reset the service light; you will see the light reset on the instrument panel, finally turning off and back on the panel!

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on an Iveco Daily?
How to reset the "Service" light on an Iveco Daily?
IVECO Daily (2014-2026 / MK 5) To reset the "Service" light on an Iveco Daily, start by pressing and holding the accelerator for 10 seconds. Continue holding the accelerator while …
How to reset the service light on the Iveco Daily
How to reset the service light on the Iveco Daily
IVECO Daily (2014-2026 / MK 5) To reset the service light on the Iveco Daily, follow these steps: Turn on the Iveco Daily and ensure the service light is displayed on the dashboard…
How to reset the Service light on the Iveco Daily?
How to reset the Service light on the Iveco Daily?
IVECO Daily To reset the Service light on the Iveco Daily, turn the key to switch on the instrument panel and check that the light is illuminated. To reset it, p…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos