Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Iveco Daily

Model: IVECO Daily
Part: Service warning light

See other generations:
Video tutorial

After performing the oil change as per the maintenance schedule for the Iveco Daily, follow these steps to reset the Service light on the dashboard that alerts you to this operation. Sit in the driver's seat, turn the key to switch on the ignition, press and hold the accelerator pedal for fifteen seconds.

After this time, pump the brake pedal ten times, then turn off the ignition. When you restart the engine, the disappearance of the light will confirm the operation was successful.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Iveco Daily?
How to Reset the Service Light on the Iveco Daily?
IVECO Daily To reset the Service light on the Iveco Daily, press the accelerator pedal while the vehicle is completely off: while holding it down, turn the key i…
How to reset the service light on the Iveco Daily
How to reset the service light on the Iveco Daily
IVECO Daily (2014-2026 / MK 5) Below we will see the procedure on how to reset the service light for the routine maintenance of the oil change on the Iveco Daily. First, we get on …
How to Reset the Service Light on the Iveco Daily
How to Reset the Service Light on the Iveco Daily
IVECO Daily (2006-2020 / MK 4) This guide will show you how to reset the service light on the Iveco Daily. First, get into the vehicle and press and hold the accelerator pedal whil…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos