Do it yourself
| ||||
|
IVECO Daily - Video tutorial
Model: IVECO Daily
MK 4
- Years 2006-2020 After performing the mandatory routine maintenance on an Iveco Daily vehicle, it is necessary to reset the corresponding maintenance light. Let's start by turning on the car and then pressing the accelerator pedal and the brake pedal. Press the brake pedal ten times before releasing it. When the light has finished flashing for about 10 seconds, release both pedals and turn off the Iveco dashboard. To check that the light has actually turned off, restart the dashboard and check. The procedure can be performed a second time, after which it will be necessary to go to the workshop.
Posted on 1 October 2023 by ScegliAuto
Other guides that may interest you
|
Replace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |