Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Iveco Daily 4

Model: IVECO Daily MK 4 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

Restoring the maintenance interval on an Iveco Daily mk4 model vehicle is a simple and quick operation to be carried out independently. To reset the service light on this type of vehicle, we must turn on the instrument panel and press the accelerator pedal and the brake pedal simultaneously.

Keeping the brake pedal pressed, we press the accelerator pedal three times in a row. When the service light on the instrument panel is indicated with a wrench, it will turn off and we can release both pedals and restart the instrument panel. If the light appears on the display, it will be necessary to go to the workshop.


Posted on 27 October 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a 2014 Iveco Daily
How to Reset the Service Light on a 2014 Iveco Daily
IVECO Daily (2006-2020 / MK 4) The steps to reset the service light on a 2014 Iveco Daily are simple and quick to perform independently. The steps are: - close all vehicle doors; -…
How to reset the service light on the Iveco Daily.
How to reset the service light on the Iveco Daily.
IVECO Daily (1978-1999 / MK 1) Today we will explain how to reset the service light on an Iveco Daily vehicle, model produced from 1989 to 1996. To perform the reset, we need to tu…
How to Reset the Service Light on the Iveco Daily
How to Reset the Service Light on the Iveco Daily
IVECO Daily (2006-2020 / MK 4) After performing the mandatory service on an Iveco Daily, it is necessary to reset the maintenance light. Start by turning on the vehicle and then pr…

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos