|
Do it yourself
| |||
| ||||
How to Replace the Bulb in the Wing Mirror Indicator of an Iveco Daily
Model: IVECO Daily
Video tutorial
Here’s how to change the bulb in the indicator located on the external wing mirror of the Iveco Daily. Get a long shaft flat-head screwdriver. Move the lower mirror fully towards the inside of the housing: this will create enough space to insert the screwdriver and carefully pry on the clips securing the mirror at the back to remove it from its housing. At this point, you will have clear access inside where you will unscrew the screw that holds the indicator light. Disconnect the electrical connection, remove the burnt bulb, replace it with a new one, and reassemble everything.
Updated on 24 August 2026 by ScegliAuto
Related tutorials
IVECO Daily
(2014-2026 /
MK 5)
This guide shows how to replace the direction indicators located on the wing mirrors of the Iveco Daily Mk5. The first step is to remove the two wing…
IVECO Daily
(2014-2026 /
MK 5)
This guide will show you how to dismantle and replace the external wing mirror of the Iveco Daily in simple steps. First, open the front door and rem…
IVECO Daily
(2006-2020 /
MK 4)
How do you remove the wing mirror on an Iveco Daily? Follow this procedure as shown in the video: using a lever (plastic or rubber), pry between the …
Other guides you may be interested in |
How to Reset the AdBlue Warning Light on a Peugeot Boxer
To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.012
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |