Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. IVECO
    3. :
  3. S-Way
    4. : How to use Bluetooth in the Iveco S-Way?

IVECO S-Way - Video tutorial

Model: IVECO S-Way MK 1 - Years 2019-2024
Part: Car stereo
Operation: How to use Bluetooth in the Iveco S-Way?

To connect Bluetooth on an IVECO S-Way truck, you can follow these steps: Make sure your IVECO S-Way truck has Bluetooth functionality. Not all models or trim levels may have this feature, so refer to the vehicle manual or consult your dealer to confirm. Turn on the truck's ignition and activate the multimedia system. The exact process may vary depending on the specific multimedia system installed in the truck. Refer to the user manual for instructions on how to turn on the system. On your mobile device (e.g. smartphone or tablet), access the settings menu and enable Bluetooth. On the IVECO S-Way multimedia system, access the Bluetooth settings. This can usually be done by navigating through the menu or selecting a dedicated Bluetooth icon on the screen. In the Bluetooth settings menu, look for an option to "Pair" or "Connect" a device. Select this option to start the pairing process. On your mobile device, search for available Bluetooth devices. The IVECO S-Way multimedia system should appear in the list of available devices. Select the IVECO S-Way multimedia system from the list on your mobile device to initiate the pairing process. Once the pairing request is sent, you may be prompted to enter a passcode on your mobile device or the truck's multimedia system. Follow the on-screen instructions and enter the necessary passcode, if required. In some cases, the devices may pair automatically without a passcode. Once the pairing process is complete, the IVECO S-Way multimedia system and your mobile device should be connected via Bluetooth. You should be able to make and receive calls, play audio, and access other supported features through the multimedia system.


Posted on 1 February 2024 by ScegliAuto

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos