Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. IVECO
    3. :
  3. Daily
    4. : How to install the Iveco Over the air Update.

IVECO Daily - Video tutorial

Model: IVECO Daily MK 5 - Years 2014-2023
Part: Instrument cluster
Operation: How to install the Iveco Over the air Update.

In this video, we see how we can install the "IVECO Over The Air Update", the remote service that allows us to connect from a distance to perform a diagnosis or programming, so that we can be assisted at all times and anywhere, without the need to go to the workshop every time and waste time. Every time there is an update, the necessary steps will be sent to do it easily. Updates must be done in a safe place, with the engine off, key inserted, and handbrake engaged. Updates can be done both from the infotainment system and from the "Iveco Easy Daily" app, from which we will see the procedure; in both cases, we must be registered: click on the "vehicle" button and the page will open where you can activate the service and check for updates. If done on the infotainment system, the system will ask to confirm a PIN. At this point, we must turn off the vehicle for at least 20 seconds, and the update is complete.


Posted on 28 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos