Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. IVECO
    3. :
  3. Daily
    4. : Where is the OBD port of the Iveco Daily 5 located?

IVECO Daily - Video tutorial

Model: IVECO Daily MK 5 - Years 2014-2023
Part: Dashboard
Operation: Where is the OBD port of the Iveco Daily 5 located?

If you own an Iveco Daily Mk5 (latest model) and want to find out where the OBD port is located, which allows you to connect a diagnostic tool useful for identifying and solving issues detected by the ECU, then all you have to do is read the following guide and follow the described steps. The entire procedure really only takes a few seconds. First of all, enter the driver's side of the cabin, make sure the vehicle is completely turned off, and shift your attention to the lower left side of the dashboard. Finally, locate the OBD port.


Posted on 28 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos