Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Jaguar XE

Model: Jaguar Xe MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Warning light – error code

Video tutorial

In this video, you can see how to reset the service light on a right-hand drive Jaguar XE. First, turn on the instrument cluster, open the passenger door, and also open the bonnet; it is sufficient to release the latch, you do not need to fully open the bonnet.

Now, press the brake and accelerator pedals down simultaneously for ten seconds.

The display will show "service mode reset". Now, turn off the instrument cluster. Wait a moment and then turn it back on to check that the maintenance indicator is off.


Updated on 21 October 2026 by ScegliAuto


Related tutorials

Jaguar Xe (2015-2024 / MK 1) Resetting the service on a Jaguar Xe. Turn on the instrument cluster of your car with the start/stop button; turn on the car's multimedia system. Use…
Jaguar Xe (2015-2024 / MK 1) To reset the "Service" light on your Jaguar XE, follow these steps. Start the car and wait for all dashboard checks to complete, including the illumi…
Jaguar Xe (2015-2024 / MK 1) Today we will explain how to reset the service light on a 2016 Jaguar XE. To reset the light, it is important to keep the front hood and passenger si…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos