Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to improve the sound of the Jaguar XKR exhaust

Model: Jaguar Xkr MK 1, X100 - Years 1996-2006
Part: Exhaust muffler

Today we will explain how to improve the sound of the exhaust of the Jaguar XKR model X 150 on your own. To perform this simple operation and fully open the active exhaust, we need to turn off the vehicle and remove the 10 amp fuse number 19 located in the fuse box at the rear of the car, behind the central seat of the bench. To access the fuse box, pull the top of the central seat outward. Remove the fuse and close the fuse box cover. By doing this, we will have improved the sound of the exhaust.

Posted on 23 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Boot of a Jaguar XKR
How to Open the Boot of a Jaguar XKR
Jaguar Xkr (1996-2006 / MK 1, X100) Before you can start, exit the cabin of your Jaguar XKR. The lock to open the boot is located inside the rear badge where it says "XKR": Start by ins…
How to Remove the Wheel Arch of the Jaguar XKR?
How to Remove the Wheel Arch of the Jaguar XKR?
Jaguar Xkr (1996-2006 / MK 1, X100) To remove the wheel arch of the Jaguar XKR, loosen the bolts securing the corresponding wheel and remove it to gain easier access to the wheel arch. …
How to Reset the Service Light on a Jaguar XKR
How to Reset the Service Light on a Jaguar XKR
Jaguar Xkr (1996-2006 / MK 1, X100) Today, we will explain how to reset the service light related to the car service on a Jaguar XKR. Press the fog light button for three seconds and th…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos