Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the key fob battery for the Jaguar XE.

Model: Jaguar Xe MK 1 - Years 2015-2024
Part: Key

Let's see the procedure for dismantling and replacing the battery of the Jaguar XE key remote. First, let's take our remote control and start by removing the side plastic cover and the physical key. Then, we pry open the sides of the remote to separate it into two parts, thus accessing the circuit board and the battery, as shown in the video. At this point, we remove and install the new battery, making sure it is the correct type and has the same designation; we insert it in the correct orientation and reassemble the remote control, checking that the buttons are functioning properly.

Posted on 5 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Jaguar XE key remote control
How to replace the battery of the Jaguar XE key remote control
Jaguar Xe (2015-2024 / MK 1) These simple steps will guide us through the process of disassembling and replacing the battery of the key fob for the Jaguar XE. First, we take our …
How to replace the remote battery on the Jaguar XE?
How to replace the remote battery on the Jaguar XE?
Jaguar Xe (2015-2024 / MK 1) In this tutorial, learn how to replace the remote battery on the Jaguar XE, a very simple and quick operation. You will need a small flathead screwdr…
How to replace the battery of the Jaguar XE remote control?
How to replace the battery of the Jaguar XE remote control?
Jaguar Xe (2015-2024 / MK 1) In this tutorial we can see how to replace the battery of the Jaguar XE remote control, an extremely simple and quick operation. To do this we will n…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos