Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Jeep
  4. :
  5. Compass
  6. : Parking sensors

Jeep Compass - Parking sensors

Parking Sensors Jeep Compass (2016-2025 / 552, mk 2)

Jeep Compass (2016-2025 / 552, MK 2)
How to enable and disable the parking assistance sensor on the Jeep Compass II

In this video we can see how to enable and disable the parking assistance sensor on a Jeep Compass II: on the central console we find a button with the "P" and …Read all…
Posted on 23 November 2024 by ScegliAuto
Jeep Compass (2016-2025 / 552, MK 2)
How to Install the Rear Camera on the Jeep Compass?

By purchasing a kit with a rear camera specific to your vehicle, you can install it by following the steps below: essentially, you will replace the standard …Read all…
Posted on 8 September 2026 by ScegliAuto

Airbag (4) Alternator (1) Speaker (1) Shocks (1) Car stereo (21) Roof rack bars (1) Battery (7) Air vents (1) Control arm (2) Transmission (2) Spark plugs (2) Body (4) Key (35) Timing belt (4) Onboard computer (16) Checks and maintenance (36) Dashboard (4) Rear bench seat (1) Side marker light (1) Headlight (4) Tail light (3) Fog lights (1) Air filter (6) Cabin air filter (15) Fuel filter (1) Diesel fuel filter (1) Oil filter (1) Parking brake (1) Light bulb (4) Headlight bulb (16) Tail light bulb (4) Interior dome light bulb (1) Instrument panel light (1) Handle (2) Engine oil (9) Power steering fluid (1) Clock (7) Door trim panel (6) Front bumper (1) Brake pads (3) Tires (1) Pump (1) Fuel pump (1) Instrument cluster (9) Wheel (1) Fuse box (27) Parking sensors (2) Side mirror (2) Warning light – error code (18) (9) Tire pressure warning light (14) Service warning light (110) Manufacturer emblem (1) Engine mount (1) Fuel cap (7) Windshield wipers (4) Thermostat (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos