Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : Shock absorbers

Jeep Compass - Shock absorbers

Jeep Compass (2006-2016 / MK 1, MK 49)
Removing the Jeep Compass tailgate shock absorbers
In this video tutorial we will see how to quickly and easily disassemble and replace the rear door shock absorbers of a Jeep Compass. First of all, let's get …read all…
Posted on 24 December 2023 by ScegliAuto
Airbags (2) Alternator (1) Loudspeaker (1) Shock absorbers (1) Car stereo (17) Roof Rack Bars (1) Battery (9) Air Vents (1) Arm (2) Bodywork (2) Key (27) Timing belt (1) -board computer (21) Checks and maintenance (69) Dashboard (1) Side indicator light (1) Headlight (4) Tail light (2) Fog lights (1) Air filter (3) Cabin air filter (13) Diesel filter (1) Oil filter (1) Hand brake (1) Light bulb (4) Headlight bulb (13) Rear light bulb (4) Interior lights ceiling light bulb (1) Dashboard light (1) Handle (1) Engine oil (12) Door panel (5) Front bumper (1) Brake pads (3) Hydraulic pistons (1) Tires (3) Pump (1) Fuel pump (1) Instrument cluster (18) Wheel (1) Fuse box (16) Parking sensors (1) Outside rearview mirror (2) Windscreen wipers (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos