Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : Tires

Jeep Compass - Tires

Jeep Compass (2006-2016 / MK 1, MK 49)
How to replace the TPMS sensor and turn off the Jeep Compass tire pressure warning light
The guide shows how to replace traditional valves with those equipped with tire pressure sensors on the Jeep Compass and turn off the related warning light on …read all…
Posted on 12 February 2024 by ScegliAuto
Jeep Compass (2006-2016 / MK 1, MK 49)
Tire change on Jeep Compass
Open the trunk and remove the bottom cover, as shown in the video. Under it you will find a jack: unscrew the catch and remove it. Removing and replacing tires …read all…
Posted on 27 January 2024 by ScegliAuto
Jeep Compass (2016-2024 / MK 2, 552)
Jeep Compass tire sensor reset
The tire pressure sensor is similar in all the cars of the Jeep production house, in this case the example comes from a Jeep Wrangler but it is also identical …read all…
Posted on 17 November 2023 by ScegliAuto
Airbags (2) Alternator (1) Loudspeaker (1) Shock absorbers (1) Car stereo (17) Roof Rack Bars (1) Battery (9) Air Vents (1) Arm (2) Bodywork (2) Key (27) Timing belt (1) -board computer (21) Checks and maintenance (69) Dashboard (1) Side indicator light (1) Headlight (4) Tail light (2) Fog lights (1) Air filter (3) Cabin air filter (13) Diesel filter (1) Oil filter (1) Hand brake (1) Light bulb (4) Headlight bulb (13) Rear light bulb (4) Interior lights ceiling light bulb (1) Dashboard light (1) Handle (1) Engine oil (12) Door panel (5) Front bumper (1) Brake pads (3) Hydraulic pistons (1) Tires (3) Pump (1) Fuel pump (1) Instrument cluster (18) Wheel (1) Fuse box (16) Parking sensors (1) Outside rearview mirror (2) Windscreen wipers (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos