Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : Tail light bulb

Jeep Compass - Tail light bulb

Tail Light Bulb Jeep Compass (2016-2025 / 552, mk 2)

Jeep Compass (2006-2016 / MK 1, MK 49)
How to Replace the Rear Light Bulbs on a Jeep Compass?
As shown in this tutorial, replacing the rear light bulbs on a Jeep Compass is an extremely simple and quick operation. Before proceeding, ensure that the key …Read all…
Posted on 12 July 2026 by ScegliAuto
Jeep Compass (2016-2025 / 552, MK 2)
Replacing the Rear Bulbs on Jeep Compass
To replace the front headlight bulbs on a Jeep Compass and other Jeep models, start by lifting the boot lid. Now, using a flathead screwdriver, detach the two …Read all…
Posted on 13 June 2026 by ScegliAuto
Jeep Compass (2006-2016 / MK 1, MK 49)
How to Replace the Rear Light Bulb on a Jeep Compass
Before you start, open the tailgate of your Jeep Compass. Begin by unclipping and removing the clips that secure the rear light to the vehicle. Next, unclip …Read all…
Posted on 23 May 2026 by ScegliAuto
Jeep Compass (2016-2025 / 552, MK 2)
Replacing Centre Brake Lights on a Jeep Compass
In this video, the entire spoiler containing the brake bulbs of interest has been removed. To do this, open the tailgate and look up. Here you will find five …Read all…
Posted on 10 April 2026 by ScegliAuto

Tail Light Bulb Jeep Compass (2006-2016 / mk 1, mk 49)

Jeep Compass (2006-2016 / MK 1, MK 49)
How to Replace the Rear Light Bulbs on a Jeep Compass?
As shown in this tutorial, replacing the rear light bulbs on a Jeep Compass is an extremely simple and quick operation. Before proceeding, ensure that the key …Read all…
Posted on 12 July 2026 by ScegliAuto
Jeep Compass (2016-2025 / 552, MK 2)
Replacing the Rear Bulbs on Jeep Compass
To replace the front headlight bulbs on a Jeep Compass and other Jeep models, start by lifting the boot lid. Now, using a flathead screwdriver, detach the two …Read all…
Posted on 13 June 2026 by ScegliAuto
Jeep Compass (2006-2016 / MK 1, MK 49)
How to Replace the Rear Light Bulb on a Jeep Compass
Before you start, open the tailgate of your Jeep Compass. Begin by unclipping and removing the clips that secure the rear light to the vehicle. Next, unclip …Read all…
Posted on 23 May 2026 by ScegliAuto
Jeep Compass (2016-2025 / 552, MK 2)
Replacing Centre Brake Lights on a Jeep Compass
In this video, the entire spoiler containing the brake bulbs of interest has been removed. To do this, open the tailgate and look up. Here you will find five …Read all…
Posted on 10 April 2026 by ScegliAuto
Airbag (4) Alternator (1) Speaker (1) Shocks (1) Car stereo (21) Roof rack bars (1) Battery (7) Air vents (1) Control arm (2) Transmission (2) Spark plugs (2) Body (4) Key (35) Timing belt (4) Onboard computer (16) Checks and maintenance (36) Dashboard (4) Rear bench seat (1) Side marker light (1) Headlight (4) Tail light (3) Fog lights (1) Air filter (6) Cabin air filter (15) Fuel filter (1) Diesel fuel filter (1) Oil filter (1) Parking brake (1) Light bulb (4) Headlight bulb (16) Tail light bulb (4) Interior dome light bulb (1) Instrument panel light (1) Handle (2) Engine oil (9) Power steering fluid (1) Clock (7) Door trim panel (6) Front bumper (1) Brake pads (3) Tires (1) Pump (1) Fuel pump (1) Instrument cluster (9) Wheel (1) Fuse box (27) Parking sensors (2) Side mirror (2) Warning light – error code (18) (9) Tire pressure warning light (14) Service warning light (110) Manufacturer emblem (1) Engine mount (1) Fuel cap (7) Windshield wipers (4) Thermostat (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos