Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on a Jeep Compass?

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Tail light bulb

As shown in this tutorial, replacing the rear light bulbs on a Jeep Compass is an extremely simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by opening the boot lid, then locate the two plastic rivets on the inner edge of the light unit and, using a spatula or flat-head screwdriver, remove both. Next, grasp the light unit, pull it towards you, and separate it from the bodywork. At this point, simply disconnect the connector, replace the faulty bulb, and reassemble everything.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light of a Jeep Compass
How to Remove the Rear Light of a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Let’s look at how to remove the rear light on a Jeep Compass. In this video, see how to take off the light and replace the bulbs. Open the boot lid, …
Replacing the Rear Bulbs on Jeep Compass
Replacing the Rear Bulbs on Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) To replace the front headlight bulbs on a Jeep Compass and other Jeep models, start by lifting the boot lid. Now, using a flathead screwdriver, detac…
How to Remove the Rear Light of the Jeep Compass mk2?
How to Remove the Rear Light of the Jeep Compass mk2?
Jeep Compass (2016-2025 / 552, MK 2) In this video tutorial, you can see how to remove the rear light of the Jeep Compass mk2, in case you need to replace one or more bulbs or the light …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos