Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Protective Mats in a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Body

See other generations:
Video tutorial

The protective mats presented by this YouTuber are very practical, featuring raised edges to protect the carpet and trap dirt, water, and mud, making them particularly suitable for those living in cold climates. They are made from laser-cut plastic, which is not rubber but is equally soft, allowing for easy cleaning.

They can be installed and removed with great ease, and the front part features practical clips to prevent slipping while driving. They can be purchased through eBay on the Weather-tech website with code 400479458452 for £197.97.


Updated on 5 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight on a Jeep Compass
How to Replace the Front Headlight on a Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) Before starting, open the front bonnet of your Jeep Compass. Begin by disassembling and removing the front bumper by unscrewing the fastening screws …
How to Replace the Front Headlight Bulb of a Jeep Compass
How to Replace the Front Headlight Bulb of a Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) Before you begin, open the front bonnet of your Jeep Compass. Start by disconnecting the electrical connector attached to the blown bulb, using a fla…
Where to Find and How to Access the Cigarette Lighter Fuse on a Jeep Compass?
Where to Find and How to Access the Cigarette Lighter Fuse on a Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) The cigarette lighter fuse on your Jeep Compass is located inside the fuse box. The fuse box is situated within the engine bay, near the battery. To …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos