Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulbs in a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Headlight bulb

How do you replace the bulbs fitted in the lower (front) light of a Jeep Compass? Using a suitable screwdriver, remove the plastic cover located at the bottom of the bumper to access the lower headlight. Locate the inspection caps for the headlights (located at the rear of the headlight) and remove them. Pull the bulb holders out of the headlight and extract the damaged bulbs with the help of a screwdriver (if necessary). Fit the new bulbs (always the correct type and size) and insert the bulb holder into the headlight housing. Reassemble all the previously removed parts. Test the new bulbs.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlamp Bulbs on a Jeep Compass
How to Replace the Headlamp Bulbs on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Follow these steps to replace the headlamp bulbs on a Jeep Compass: open the bonnet by pulling the lever located at the bottom right of the dashboard…
Replacing the Front Headlight Bulbs on a Jeep Compass
Replacing the Front Headlight Bulbs on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Are your headlight bulbs blown? Here’s how to replace the front headlight bulbs on a Jeep Compass. Unscrew the plastic cover at the bottom of the bum…
How to Replace the Front Headlight Bulb of a Jeep Compass
How to Replace the Front Headlight Bulb of a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Before you begin, open the front bonnet of your Jeep Compass. Start by disconnecting the electrical connector attached to the blown bulb, using a fla…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos