Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Bulbs on Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Tail light bulb

To replace the front headlight bulbs on a Jeep Compass and other Jeep models, start by lifting the boot lid. Now, using a flathead screwdriver, detach the two rubber covers as shown in the video. At this point, you will have exposed the two T25 Torx screws that you will need to unscrew. This will allow you to extract the headlight from its housing and disconnect its connector. Once done, you can access the bulbs from the usually hidden side and replace them easily. Proceed in reverse for reassembly. Cheers!

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlight Bulbs on a Jeep Compass
Replacing the Front Headlight Bulbs on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Are your headlight bulbs blown? Here’s how to replace the front headlight bulbs on a Jeep Compass. Unscrew the plastic cover at the bottom of the bum…
Replacing Headlight Bulbs on Jeep Compass
Replacing Headlight Bulbs on Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Need to replace damaged front headlight bulbs on a Jeep Compass? Here’s how to do it. Open the bonnet by pulling the lever located at the bottom righ…
How to Replace the Rear Light Bulbs on a Jeep Compass?
How to Replace the Rear Light Bulbs on a Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) As shown in this tutorial, replacing the rear light bulbs on a Jeep Compass is an extremely simple and quick operation. Before proceeding, ensure tha…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos