Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Centre Brake Lights on a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tail light bulb

See other generations:
Video tutorial

In this video, the entire spoiler containing the brake bulbs of interest has been removed. To do this, open the tailgate and look up. Here you will find five caps under which you can locate the anchoring mechanism of the entire spoiler.

On the side supports, loosen the anchoring bolts, while on the central support, use pliers to remove the plastic clip. Now, close the tailgate and detach the spoiler from the vehicle, also disconnecting the rear wiper tube and the light connector.

From the spoiler, it will then be simple and intuitive to remove the brake light itself.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

How to Disable the Start&Stop System on the Jeep Compass
How to Disable the Start&Stop System on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Today we will discover the instructions that will allow us to enable and disable the Start&Stop system on the Jeep Compass, in simple steps. First, l…
How to restore the operation of the start&stop system of the Jeep Compass
How to restore the operation of the start&stop system of the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this short and simple guide, we will see how to reset the start&stop system of the Jeep Compass, following the instructions below. In order for th…
How to Disable Start&Stop on a Jeep Compass?
How to Disable Start&Stop on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To disable the Start&Stop feature on a Jeep Compass, turn on the ignition by inserting the key into the ignition switch: at this point, locate the bu…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos